Linear Lights Bottom Shell Roll Forming Machine

Main Specificatio2in of the liner light bottom shell machine:

1. Profiles of the bottom shell of linear lights: Produced by cold bending machinery, with lengths of 12 meters and 2.4 meters respectively. They have different hole patterns. Only one set of molds is needed and the production mode can be switched on the touch screen.

2. Punching machine: Equipped with a JNC-200 feeder (fed by servo motor) and 6 punching molds. When switching to produce products with different hole patterns, the production mode can be switched on the touch screen of the control box and it will operate automatically.

3. Control electrical box: Built-in components include a touch screen, Programmable Logic Controller (PLC), circuits, frequency converters, relays, etc.

4. Integrated uncoiling and leveling machine: It can produce finished products with two lengths (1.2 meters and 2.4 meters) and two hole patterns.

Process flow of the Linear lighting shell roll forming machine:

Uncoiler→ leveling → Punch units → Hydraulic Cut

Main components of the linear lighting bottom shell roll forming machine:

Uncoiler with leveling device 1500kgs
Servo feeding device 1 set
hydraulic punch units 1 set
Roll forming main machine 12 groups of rollers 1 set
Hydraulic cutting device 1 set
Finished products collect device 1 set
PLC Control

Category Cold Roll Forming Machine

linear lighting bottom shell roll forming machine

Quick Introduction of this line

This set of cold bending production line for the bottom shell of linear lights has two built-in production modes. It can produce products with two different lengths (1.2 meters and 1.4 meters) and different hole patterns. It’s convenient to switch between the production of the two products. Just switch the production mode on the screen to produce the other product.